目前，建筑施工中應用的工地圍擋結構具有相應的防風水平，為了更合理地抵御風速，例如，在一些強雨天，為了避免一些不需要惡性事件的發(fā)生，有需要對工地圍擋結構進行加固和防風，你知道工地圍擋施工結構是如何防風的嗎？

At present, the construction site enclosure structure used in construction has a corresponding wind protection level. In order to more reasonably resist the wind speed, for example, in some strong rainy days, in order to avoid some unnecessary malignant events, it is necessary to strengthen and protect the construction site enclosure structure. Do you know how the construction site enclosure structure is windproof?

工地圍擋防風具體措施，以下：

Specific measures for wind protection at the construction site are as follows:

1.員工應及時接聽天氣預報，并與氣象局保持聯系，避免大風等氣溫意外。

1. Employees shall answer the weather forecast in time and keep in touch with the Meteorological Bureau to avoid temperature accidents such as strong winds.

2.員工定期、多方位、細心地對工地圍擋進行防風檢查，整改隱患。

2. The staff shall regularly, comprehensively and carefully check the wind protection of the construction site enclosure and rectify the hidden dangers.

3.建筑材料焊接在施工圍欄柱和柱之間，因為以前的粘土已經基本被人們淘汰，使院墻連接更緊密，整體承載能力避免幼苗倒塌。

3. The building materials are welded between the construction fence columns. Because the previous clay has been basically eliminated by people, the courtyard walls are more closely connected, and the overall bearing capacity avoids the collapse of seedlings.

4.施工圍欄內側增加方形鋼管柱，柱與柱之間焊接連接。

4. Square steel pipe column shall be added inside the construction fence, and welded between columns.

5.施工圍欄正下方堆積沙袋，壓底，避免底部被風輕輕吹開。

5. Sand bags shall be stacked directly under the construction fence to press the bottom to avoid the bottom being blown open by the wind.

施工圍墻防風具體措施，根據施工圍墻防風結構加固工作，可合理避免施工圍墻吹風、吹風風險，自然，除防風具體措施外，在整個裝配過程中，適當遵守施工圍墻現場裝配要求也非常重要，為施工提供更大的保證，使施工現場員工確?？煽?。

Specific measures for wind protection of the construction wall. According to the reinforcement of the wind protection structure of the construction wall, the wind blowing and blowing risks of the construction wall can be reasonably avoided. Naturally, in addition to the specific measures for wind protection, it is also very important to properly comply with the site assembly requirements of the construction wall during the whole assembly process, so as to provide greater assurance for the construction and ensure the reliability of the construction site staff.

工地圍擋的安裝其實很簡單，并不是很難，但需要人耐心點，用立柱將橫桿支撐起來，每一個角落和每一個角落用東西把它固定，像一些擋墻的設置中，用彩鋼圍擋和U型槽組成框架，用攻螺絲固定在型槽上，這個時候，要牢固，要仔細，不可馬虎，同時，為了穩(wěn)定它的牢固性，盡可能每間隔一段距離用鋼管支撐一下，這樣可以達到一個版面都是穩(wěn)定的。

The installation of the fence on the construction site is actually very simple, not very difficult, but it needs patience. The cross bar is supported by the column. Every corner and every corner is fixed with something. For example, in the setting of some retaining walls, the colored steel fence and U-shaped groove are used to form a frame and fixed on the groove with tapping screws. At this time, it should be firm, careful and not sloppy. At the same time, in order to stabilize its firmness, Try to use steel pipes to support every interval, so that a layout can be stable.

在我們安裝完后，我們要在板與地平線的地方裝一條警示線，這樣當車光照到上面就會反光到司機眼里，以防撞到。更多相關注意事項就來我們網站http://www.beiyangkong.cn咨詢吧。

After our installation, we will install a warning line between the board and the horizon, so that when the vehicle is illuminated, it will reflect to the driver's eyes to avoid collision. For more information, please visit our website http://www.beiyangkong.cn Consult.